GO
 

HALT & HASS Chamber Time Compressor® 2.5

The Time Compressor 2.5 model is our most popular model and is well suited for most applications and products, allowing for future for expansion. This HALT & HASS chamber includes a larger vibration table size of 30” x 30” (76cm x 76cm) with front & rear opening doors.

Much like the Time Compressor 2.0, the 2.5 also includes air ducts for concentrated air flow. When paired with with efficient LN2 cooling the Time Compressor 2.0 can reduce power usage allowing for decreased operating costs.
 

System Benefits

  • Superior reliability and thermal performance
  • Significantly better high and low vibration limits (required for detection)
  • Quiet operation
  • Low LN2 and utility usage for greater ROI

  • Specifications
  • Vibration
  • Instrumentation
  • Communications
  • Cabinet
Temperature Range -100°C to 200°C
Temperature Ramp Rate 70°C to 100°C per minute¹
Vibration Level 1 - 90 GRMS
Frequency Range 0 Hz - 10 KHz
Table Size
(cm)		 30" x 30"
(76cm x 76cm)
Actuators 9
Workspace Dimensions
(cm)		 34"W x 34"D x 34"H
(86cm x 86cm x 86cm)
Outside Dimensions
(cm)		 65"W x 48"D x 84"H
(165cm x 122cm x 213cm)
¹Measured at -65°C to 85°C 6” above table center with hoses attached. Rate will vary depending on model and dwell time.


  • Large dynamic range shaker with six actuators and 1 GRMS to 90 GRMS with a bare table. High GRMS levels are used to enhance precipitation while low GRMS levels, with Modulated Excitation™, help to increase detection.
  • A diaphragm is included to prevent vibration table temperature changes. It also provides better low-frequency vibration coupling than a bare table.


  • CSZ EZT-570s Touch Screen Controller with data logging, remote control & monitoring, email/text alarm notification messages, data file backup system, full system security and more. Includes pre-programmed test profiles for faster program implementation.
  • Factory preset mechanical over temperature limit. Separate user-adjustable electronic limits are also included for over and under temperature and vibration, providing fully redundant safety limits.
  • Safety relay connection is provided for customer use to protect the device being tested by turning off its power when the chamber is not running.


  • RS-232/485 serial communications and Ethernet control/monitoring offer a selection of communications options.
  • EZ-View works with EZT-570s controller to provide remote monitoring, control, data logging and store/graph measured temperature and vibration GRMS data. This software is provided as a no cost value added feature.


  • Front and rear doors with heated windows for easy loading of product. Doors include safety interlock switches to prevent the system from running with the door open.
  • One 4" x 8" (10cm x 20cm) side port and front 2" x 6" (5cm x 15cm) cable notch for easy cable routing. All ports are provided with insulated plugs.
  • Stainless steel interior and durable powder-coated exterior.